UAVOS Inc APX Autopilot
  • Ground Control
  • Integration
  • Hardware
  • Contacts
Integration manual Airspeed sensor Altimeter Analog inputs Antenna Tracking System Autopilot controls Auxilary CAN BLDC motor control CANaerospace CANopen Downlink Encoder interface GPS Receiver Gimbal Inertial Measurement Unit Inertial Navigation Modem function Motor control Onboard data recorder OneWire interface Pitot heater Ports Multiplexer Ports and controls Power monitor Radio Real Time Clock Sensors redundancy Serial Ports Serial Protocols USB Interface Virtual Machine

Integration manual

This section describes how to tune hardware parameters, connect physical signals and set-up sensors.

Note

Usually, if the setting value is zero, the feature considered as turned off.

APX Autopilot by UAVOS Inc. 2019 | © Aliaksei Stratsilatau  | Back to top